Static Control Products
SCS 2389 Monitor/Table Mat Interconnect Cord
- Interconnect cord for two worksurface mats
Daisy-chains two worksurface mats for the monitoring of two workstations with the 724 Workstation Monitor - Low profile
SCS 2380D Monitor/Table Mat Replacement Cord
- Connects workstation monitors to worksurface mats
- Tinned wire terminal connects to the workstation monitor
- 10mm stud terminal connects to the worksurface mat
- Embedded diode protects the workstation monitor should any voltage be induced onto the worksurface mat
- No resistor
- Length: 6 ft.
SCS 2210 Wrist Strap Ground Cords
SCS Wrist Strap Ground Cords 2210, 2220 and 4610 Series are highly
durable with segmented strain relief, and a single bundle of tinsel
conductors laced for great strength and reinforced with strong synthetic
fibers. These features provide long cord life and easy movement. Each
cord has a 1 megohm resistor molded into the snap end.
SCS 2200 Series Metal Wrist Band (Fixed Size)
SCS Metal Wrist Bands 2200 Series feature quality Speidel™ metal
expansion bands for durability and comfort. Each link is covered with
an insulative plastic cap. Compatible with the SCS Wrist Strap Ground
Cords 2210, 2220 and 4610/4611.
Three sizes are available: small for user’s wrists from 4.5 in. to 6 in.
(114 mm to 152 mm) in circumference; medium for user’s wrists from
5.5 in. to 7.25 in. (140 mm to 184 mm); and large for user’s wrists larger
than 6.5 in. (165 mm). Available with 1/8 in. (4 mm) snap end. This
SCS 2100R Metal-Out Static Shielding Bags
- Metal-Out Bags Required by Some Leading Hi-Tech Companies, Exterior Surface Rs 1 x 104 to < 1 x 108 ohms per ANSI/ESD STM11.11
Metal-Out lower exterior resistance retains less electrostatic charge than Metal-In bags - Metal-Out Shielding Laminate 0.003” thick (3 mil)
Protects ESD sensitive contents from electrostatic fields and electrostatic discharges (ESD) outside the ESD Protected Area - <10 nJ Discharge Shielding Energy Penetration Test per ANSI/ESD STM11.31
3M 40 Antistatic Utility Tape
3M #40 Antistatic Utility Tape combines 3M 's remarkable antistatic adhesive with a clear, one mil polyester film backing, and is perfect for use in static-sensitive areas. In fact, an optional special pattern of ESD symbols alerts users that this is the only tape that should be used in static-safe areas.
SCS 8507 Portable Field Service Kit
- Portable Field Service Kit with Wrist Strap Monitor provides continuous monitoring and ESD protection.
- Fits easily into most tool cases.
- Surface Resistance:
- Rtg: 1 x 106 to <1 x 109 ohms per ANSI/ESD S4.1
SCS 8501 Portable Field Service Kit
- Portable Field Service Kit quickly removes any static charge on electronics field service technician and provides an ESD-Safe surface to lay parts.
- Fits easily into most tool cases.
- Surface Resistance:
- Rtg: 1 x 106 to <1 x 109
SCS 725 Wrist Strap Monitor
- Continuously monitors 1 operator dual-wire wrist strap and 1 ground connection
Visual and audible alarms indicate proper grounding of the operator and ground point - Compact size and 9 volt battery power supply
Monitor may be setup in areas where AC power is not available - 10mm ground snap located underneath the monitor
Monitor can provide ground to a portable worksurface when connected via the 10mm snap
724 Workstation Monitor
- Single workstation continuous monitor
Meets ANSI/ESD S20.20 in accordance with ESD TR12-01. - Continuously monitors 2 operator dual-wire wrist straps and 1 worksurface mat
Visible and audible alarms indicate improper grounding of the operator and worksurface. - Adjustable operator test voltage and upper limit
Test voltage can be set to 9 or 16 volts; test limit can be set to 10 or 35 megohms. - Adjustable audible alarm