Workstation Monitor

Image: 

WRIST STRAP AND GROUND MONITOR

Image: 

VERIFICATION TESTER, FOR WSMONITOR2 PLUS

Image: 

• NEW Ionizer Compatibility Range and Interchangeable Ionizer Antenna
  Monitors ionizers with a balance (offset voltage) of ±40 V or better
• ESD Event Continuous Monitor
  Detects and measures the unique waveform generated by ESD events
• Static Voltage Field Continuous Monitor
  

Image: 

VERIFICATION TESTER, FOR 724 & 725 MONITORS

Image: 

WSMONITOR2 PLUS MONITOR 

Image: 

• Dual Workstation Continuous Monitor
  Continuously monitors the path-to-ground integrity of two operators and four metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
• Digital Signal Processing Technology
  Applies an ultra-low test voltage to the operator (0.05V) for the handling of sensitive components
• Operator Body Voltage Detection
  

Image: 

• NEW Ethernet Connectivity
  Provides network communication with Static Management Program (SMP). Data collected through SMP includes operator resistance, operator voltage, mat resistance, metal tool impedance and metal tool EMI voltage.
• NEW Optical Relay Terminal
  

Image: 

• Continuously monitors 1 operator dual-wire wrist strap and 1 ground connection
  Visual and audible alarms indicate proper grounding of the operator and ground point
• Compact size and 9 volt battery power supply
  Monitor may be setup in areas where AC power is not available
• 10mm ground snap located underneath the monitor
  Monitor can provide ground to a portable worksurface when connected via the 10mm snap

Image: 

• Single workstation continuous monitor
  Meets ANSI/ESD S20.20 in accordance with ESD TR12-01.
• Continuously monitors 2 operator dual-wire wrist straps and 1 worksurface mat
  Visible and audible alarms indicate improper grounding of the operator and worksurface.
• Adjustable operator test voltage and upper limit
  Test voltage can be set to 9 or 16 volts; test limit can be set to 10 or 35 megohms.
• Adjustable audible alarm
  

Image: 

• Parking station
  Provides a storage terminal for the dual-wire wrist cord when the workstation is unoccupied
• Metal mounting bracket
  Mounts to most surfaces conveniently located near the operator
• Increases life span of monitors