Shoe Strap System

Image: 

HEEL GROUNDER, CUP STYLE, 1 MEG RESISTOR

Image: 

WRIST STRAP, ADJUSTABLE, FABRIC, BLUE, 6' CORD

• One size fits all adjustable wrist band with 6-foot coil cord
• Blue band, black coil cord
• 4mm snap
• 1 megohm resistor
• Meets ANSI/ESD S20.20 and ANSI/ESD S1.1
• This item is stocked in Sanford, NC

Image: 

CORD, DUAL CONDUCTOR, 5', WITH RIGHT ANGLE MONO PLUG

Image: 

ADJUSTABLE WRIST BAND 

Adjustable Wrist Straps provide a comfortable, custom fit. One size adjusts to most any size wrist to provide reliable, 360-degree protection. A 1 megohm resistor is built into the ground cord. Available with 1/8 in. (4 mm) snap end.

Image: 

• Heel Grounder 

Image: 

• Cup Style Heel Grounder with Two Soles
  Used to ground standing or mobile operator to ESD Flooring
• Tab to Cup Resistance: 1 x 10⁶ to < 1 x 10⁸ohms tested per ESD SP9.2 & ESD TR53
• 24 Inch Conductive 8-Strand Nylon Polyester Grounding Tab
  Additional conductive material provides reliable connection with operator’s sweat-layer.
• One Megohm Current Limiting Resistor

Image: 

Wrist/Shoe Strap Testers should be installed at all work areas to make certain that the straps continue to protect.  Constant verification of straps, personnel, work surfaces and ground connections is provided by SCS Continuous Work Station Monitors.

Image: 

The simple practice of grounding workers via wrist/shoe straps is the most inexpensive method of ESD control and provides the most immediate benefits.  It is estimated that 40% of a company's total static control cost savings depends on the proper functioning of its wrist/shoe straps.  Therefore, the highest quality wrist/shoe straps should be specified to make certain that static-sensitive devices and printed circuit boards are being adequately protected.