Adhesives

Image: 

A liquid cleaner/degreaser that can be used to dissolve and remove dirt, grease, tar, and many non-curing type adhesives. It can also be used to degrease substrates for adhesive bonding in place of many chlorinated or petroleum-based solvents.

Image: 

Has particularly good adhesion to many difficult to bond substrates such as EPDM rubber, aluminum and flexible vinyl. It is economical to use because only drops of adhesive are needed to develop strong bonds.

Image: 

3M™ Silicone Lubricant lubricates cutting tools and tables. Fast, easy application helps preventbuildup of adhesive, wax, inks, and paints. Won’t stain or become gummy.

Image: 

3M™ Hi-Strength 90 Spray Adhesive typically bonds edge banding in 60 seconds compared to15-20 minutes for many typical bulk contact adhesives. Strength increases to an ultimate230 psi in shear and 25 piw in peel.

Image: 

With fast tack, long bonding range, and little or no soak-in, 3M™ Super 77™ Multipurpose SprayAdhesive is a versatile tool for bonding lightweight materials that include fabrics, plastics, soft foams,paper, cardboard, and thin gauge metals.

Image: 

With no surface preparation, 3M™ Scotch-Weld™ Structural Acrylic Adhesive DP8005 bonds the
mitered corners of a simulated-wood composite plastic P.O.P. display, eliminating nails that
would compromise appearance.

Image: 

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 requires minimal surface preparation for
bonding metal hinges into awning frames. Reaches handling strength in only 10 minutes.

Image: 

3M Thermo-Bond Films combine some of the best features of several proven 3M adhesive technologies:

Benefits of a 3M film:

• Precise uniform thickness for consistent bond lines.
• Precise die-cut shapes and sizes for neat manual or automated application.

Benefits of a 3M hot melt adhesive:

• Bonds in seconds with heat to help eliminate fixturing and speed assembly.
• Solvent-free adhesive system.

Unique strength and performance properties:

Image: 

3M Fastbond Contact Adhesive 30-NF is a formulation proven in shops for four decades.  Combines open time of up to 4 hours with high immediate bond strength.  Apply with roller, brush, or spray gun.

Image: 

Exterior aircraft surfaces with complex curvatures and particle and rain erosion damage are protected by 3M Protective Boots SJ8665.